Announcement

Collapse
No announcement yet.

How to set %RH for analog

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to set %RH for analog

    Hi I just got an analog AS-41L and I have no idea how to set the %RH to exactly 45%? I read the manual but it just mentioned how to set the strength of 'drying power' through the ABCDE knob. I understand that the brighter the LED, the greater the drying power.

    Is there any specific way to set the %RH to exactly 45% (or around there)? OR do I have to play around with the knob until I get 45%? Thanks in advance...

  • #2
    Re: How to set %RH for analog

    Dear adieo,

    The analog AS series, you need to adjust the knob in order to get 45% or around 45%,

    maybe you can try to turn around 80% of the knob.

    analog means the dehumidifier is Turn "ON" all the time & the level of dehumidify according to your turning knob.

    Aipo Digital EX series built in with micro computer & it provides automatic regulate RH% at your desire setting. (Peach of Mind)

    Please do not hesitate to contact us should you require further assistance / clarification.
    AIPO Dry Cabinet - www.aipo.com.my
    Insist on Digital Control & Digital Meter Dry Cabinet
    Contact 012-4229005 from 9am to 8pm only

    Comment


    • #3
      Re: How to set %RH for analog

      Ok thanks for the assistance, will try that now..

      Comment


      • #4
        Re: How to set %RH for analog

        Just leaving a tip here for anyone who plans to get an analog series as well....+/- 45% is around the 'D' section of the knob...

        Comment


        • #5
          Re: How to set %RH for analog

          Originally posted by adieo View Post
          Just leaving a tip here for anyone who plans to get an analog series as well....+/- 45% is around the 'D' section of the knob...
          thanks for the info adieo, i've being watching the % in the dry cabinet for few days, keep wondering how to adjust the % into +/-45%...i turned the knob to C, and the % showing 39%...

          I'. afraid to turn the knob far from C, hehe~ now i get it, will adjust the knob to D.

          Comment


          • #6
            Re: How to set %RH for analog

            Originally posted by Lea Jessicca View Post
            thanks for the info adieo, i've being watching the % in the dry cabinet for few days, keep wondering how to adjust the % into +/-45%...i turned the knob to C, and the % showing 39%...

            I'. afraid to turn the knob far from C, hehe~ now i get it, will adjust the knob to D.
            glad i was able to help..

            Comment


            • #7
              Re: How to set %RH for analog

              I got the 41L dry box on last Thursday. After operate for 3 days the Humidity could not reach 40%. I already set it to maximum and the best it can reach is only 55%.

              Name:  9b6a438e17fe026c68db9a4293e0112e.jpg
Views: 1
Size:  128.1 KB

              I get the replacement today but how come the size is smaller? Please see photo at B.

              From the photo A is original from the drybox. B is the new replacement.
              Since I am not sure about the reading so I borrow a digital hygrometer for comparison.

              From the result it seems that A(original) is more accurate than the new replacement(B).

              So now I am doubt about the drybox system appears to be faulty. That means it not working properly.


              Please advise.

              Comment


              • #8
                Re: How to set %RH for analog

                Im not sure why the size is different, that you have to inquire with the distributor.

                I also had the same issue where my new unit would not drop below 60% even after 3 days. However I just waited and it eventually dropped to a stable 45% after a WEEK. Maybe it is just a new unit and needed sometime to stabilize itself.

                Comment


                • #9
                  Re: How to set %RH for analog

                  Dear Mr.maxx3308

                  one of our stuff will call you up & discuss with you about your units.& teach you how to use it.

                  Yes, for analog series need some time to stabilize itself.
                  AIPO Dry Cabinet - www.aipo.com.my
                  Insist on Digital Control & Digital Meter Dry Cabinet
                  Contact 012-4229005 from 9am to 8pm only

                  Comment


                  • #10
                    Re: How to set %RH for analog

                    Originally posted by adieo View Post
                    Im not sure why the size is different, that you have to inquire with the distributor.

                    I also had the same issue where my new unit would not drop below 60% even after 3 days. However I just waited and it eventually dropped to a stable 45% after a WEEK. Maybe it is just a new unit and needed sometime to stabilize itself.
                    Did you set it to maximum?

                    Comment


                    • #11
                      Re: How to set %RH for analog

                      Originally posted by Proling Technology View Post
                      Dear Mr.maxx3308

                      one of our stuff will call you up & discuss with you about your units.& teach you how to use it.

                      Yes, for analog series need some time to stabilize itself.
                      Thanks for the call just now. Do you mean the analog hygrometer need time to stabilize? If yes.. The hygrometer respond very quick and stable when outside the drybox. And I also try to put back inside, the reading changes and stable quickly but won't falls to the reading 40% after few days. Note: all the while set to maximum E. I suspect the module do not provide enough power for it to reach 40%.

                      Please advise.

                      Please advise.

                      Comment


                      • #12
                        Re: How to set %RH for analog

                        Originally posted by maxx3308 View Post
                        Did you set it to maximum?
                        yes indeed I put it to the maximum (E) and it still would not drop below 60% even after 3 days. At first I thought my unit was faulty as well, however after a week, it eventually dropped below 50% and continued to drop until below 40%, then that's when I tuned it back to 'D' so it would stay at 45%.

                        Hope that helps , if the problem persist, its better for you to consult with the distributor for further assistance..

                        Comment


                        • #13
                          Re: How to set %RH for analog

                          the best %rRH = 42% ?

                          Comment


                          • #14
                            Re: How to set %RH for analog

                            PM replied.Thanks.
                            AIPO Dry Cabinet - www.aipo.com.my
                            Insist on Digital Control & Digital Meter Dry Cabinet
                            Contact 012-4229005 from 9am to 8pm only

                            Comment


                            • #15
                              Re: How to set %RH for analog

                              I just bought an AIPO AS-21L analog dry cabinet. I am facing the same problem with the others. I put it on D for 2-3 days still stuck around 60%.
                              WHat can I do to make it reduce faster?
                              "Don't shoot to kill; Shoot to cherish the moment"

                              Comment

                              Working...
                              X